사용자 설명서 PHILIPS HD6112

[. . . ] Always return the appliance to a service centre authorised by Philips for examination or repair. Do not attempt to repair the appliance yourself, otherwise your guarantee will become invalid. Clean the separate parts of the fryer thoroughly before using the appliance for the first time (see chapter 'Cleaning'). Make sure all parts are completely dry before you fill the fryer with oil or liquid fat. [. . . ] 10 Press the release button of the basket handle and carefully lower the basket to its lowest position (fig. Stick to the preparation time indicated on the package of the food to be fried or the preparation time mentioned in the relevant table in these instructions for use. Active Air Control` 1 This appliance is equipped with Active Air Control`, a closed system based on the principle of condensation that offers a reduction of frying odours by up to 100% (fig. - The system condenses the steam produced by frying into water in a continuous process. The condensed water is collected in a water reservoir in the bottom of the fryer housing. - The condensed water reservoir has a capacity of 750ml, which is enough to hold the quantity of condensed water resulting from frying 1. 6 kg frozen French fries. - The level indicator at the front of the reservoir tells you how much water has already been collected in the water reservoir and the maximum amount it can contain. ENGLISH 9 Once the fryer has been switched on by means of the on/of switch, the Active Air Control` system starts working and the fan in the rear part of the fryer starts running, to cool down and to condense the frying steam that develops inside the fryer. The blue System Active indication light confirms that the Active Air Control system is working (fig. Timer This appliance is equipped with an electronic timer on the display. The timer indicates the end of the frying time, but does NOT switch the fryer off. 1 Press the timer button to set the frying time in minutes. The set time will become visible on the display (fig. 2 Keep the button pressed to put the minutes forward quickly. Fill the bottles by pouring the oil or fat through a fine sieve to remove food particles. Remove the frying basket before emptying the inner bowl. Cleaning Wait until the oil or fat has cooled down sufficiently. Do not use caustic or abrasive (liquid) cleaning agents or materials such as washing soda, scouring liquid or powder or scouring pads to clean the fryer. 1 Remove the lid by pressing the release button on the hinge to unlock the lid. Then lift the lid out of the hinge (fig. When putting the lid back onto the appliance, make sure that you insert it properly into the hinge. 2 Remove the frying basket from the fryer (fig. 3 Lift the inner bowl out of the appliance and pour out the oil or fat (fig. PreClean function This appliance is equipped with a PreClean function, which offers you the possibility to soak the inner bowl with hot water to allow easier cleaning. 1 Fill the inner bowl with cold water up to three quarters of its capacity and add some washing-up liquid (fig. 2 Switch the appliance on by means of the on/off switch. Activate the PreClean function within 30 seconds by pressing the PreClean button for at least 2 seconds (fig. [. . . ] Check whether the lid has been closed properly. The fan is not working. Turn to your Philips dealer or a service centre authorised by Philips. The sealing ring around the If the ring is dirty, clean the lid in hot soapy inside of the lid is dirty or worn. If the lid is worn, turn to your Philips dealer or a service centre authorised by Philips to have the sealing ring replaced. There is too much water in the reservoir. [. . . ]