사용자 설명서 PHILIPS FC9204

[. . . ] Never use the appliance without the Motor Protection Filter. This could damage the motor and shorten the life of the appliance. Only use the Philips filter cylinder supplied with the appliance. Preparing for use Connecting accessories Hose 1 To connect the hose, push it firmly into the appliance ('click') (fig. 2 To disconnect the hose, press the release button and pull the hose out of the appliance (fig. [. . . ] Store the appliance in horizontal position, with all wheels touching the floor (fig. 4 Always put the Tri-Active nozzle in the carpet setting when you store it and prevent the side brushes from becoming bent (fig. Emptying the dust bucket Always unplug the appliance before emptying the dust bucket. The dust bucket is not dishwasher-proof. Empty the dust bucket as soon as the dust level has reached the round disc of the filter cylinder case (fig. 17). 1 Switch the appliance off and disconnect the hose from the appliance. 2 Unlock the cover by pressing the release button on top of the handle of the dust bucket (1). 3 Remove the bucket by lifting it out of the appliance (fig. 4 Hold the bucket over a dustbin and lift the filter cylinder case out of the bucket. 5 If you wish, you can clean the dust bucket with cold tap water and some washing-up liquid. 6 Put the filter cylinder case back into the dust bucket and put the bucket back into the appliance. 7 Close the cover firmly ('click'). Always put the filter cylinder case back into the bucket, otherwise the appliance cannot be switched on. Cleaning and maintenance of filters Always unplug the appliance before cleaning or replacing the filters. The filter cylinder and the filter cylinder case are not dishwasher-proof. Filter cylinder Clean the filter cylinder every 2 months. 1 Turn the handle on top of the filter cylinder case anticlockwise (1) and lift the filter cylinder out of the case (2) (fig. 2 Clean the filter cylinder and the case with the brush supplied. [. . . ] Troubleshooting 1 The suction power is insufficient. Check if the suction power knob is in maximum position. Check if the filter cylinder is filled with dirt. Check if the other filters need to be cleaned or replaced. [. . . ]