사용자 설명서 PHILIPS FC6125

[. . . ] , If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. , Keep the appliance out of the reach of children. , Never suck up water or any other liquid. Never suck up flammable substances and do not suck up ashes until they are cold. [. . . ] Usemaximumsuctionpowertovacuumverydirtycarpetsandhardfloors. Useminimumsuctionpowertovacuumcurtains, tablecarpets, etc. When you switch on the appliance, it starts running at the last selected suction power setting. If your appliance is equipped with an infrared remote control (specific types only) it starts running at the highest suction power. 15) Pausing during use 1 If you want to pause for a moment, park the tube in a convenient position by inserting the ridge on the nozzle into the parking slot. 18) 2 If your appliance is equipped with an infrared remote control (specific types only), press the standby button to temporarily switch the vacuum cleaner off, for instance when you have to move some furniture. 19) , The middle suction power light starts burning to indicate that the vacuum cleaner is in standby mode. 3 To continue vacuum cleaning, simply press the standby button, - or + button. Using the Filter-Clean button Acleanfiltercylinderhelpsmaintainhighsuctionpower. Always press the Filter-Clean button when you have finished vacuum cleaning. Thefilter-cleaningprocessonlyneedstobeperformedoncetoguaranteepropercleaningofthe filter. 26) 8 Then clean the filter cylinder case with a dry cloth or with cold tap water and some washingup liquid. 27) , Do not clean the filter cylinder case with the filter cylinder in it under the tap. 28) 9 Put the filter cylinder back into the filter cylinder case. Make sure that the filter cylinder case is dry before you reinsert the filter cylinder into it. 10 Clean the dust bucket with cold tap water and some washing-up liquid. 11 Put the filter cylinder case back into the dust bucket. Make sure that the dust bucket is dry before you reinsert the filter cylinder case. If you have not reinserted the filter cylinder case, the suction power lights start blinking and the appliance cannot be switched on. 10 English 12 Close the cover firmly (`click'). Cleaning the filter cylinder IfyoupersistentlyfailtopresstheFilter-CleanbuttonwhenthelightintheFilter-Cleanbuttonblinks, thefiltercylinderwillclogupwithdirtandthesuctionpowerwillbecomeinsufficient. Ifthishashappened, youcanunclogthefiltercylinderinthefollowingway: 1 Switch off the appliance and remove the mains plug from the wall socket. 2 Unlock the cover by pressing the release button on top of the handle of the dust bucket (1). [. . . ] 20) 12 For the best result, empty the dust bucket when the filter-cleaning process is finished (see section `Cleaning the dust bucket and filter cylinder case'). Cleaning the Motor Protection Filter CleanthepermanentMotorProtectionFiltereverytwomonths. 2 Take the Motor Protection Filter out of the appliance and clean the filter by tapping the dust out of it over a dustbin. 30) IfyouwanttocleantheMotorProtectionFiltermorethoroughly, youcanrinseitunderacoldtap. [. . . ]