사용자 설명서 PHILIPS AZ1017

[. . . ] Disconnect the mains lead from the wall socket to protect your set during heavy thunderstorms. Children could seriously injure themselves as the free end of the cable may still be live if only the connector is removed from the MAINS socket at the back of the unit. The type plate is located on the bottom of the set. General Operation/Radio General operation 1 To select your sound source, adjust the source selector to : CD, TUNER or TAPE/OFF. To switch off the set, adjust the source selector to TAPE/OFF position and check the cassette keys are released. [. . . ] REPEAT ­ plays the current track continuously. REPEAT ALL­ repeats the entire CD/program. 1 To select play mode, press REPEAT once or more. Press 2; to start playback if in the stop/pause position. To return to normal playback, press REPEAT repeatedly until the modes are no longer displayed. ­ You can also press 9 to cancel your play mode. IMPORTANT!· CDs encoded with copyright protection technologies by some record companies may be unplayable by this product. · Finding a passage within a track 1 During playback, press and hold down / §. The CD is played at high speed and low volume. When you recognize the passage you want release / §. Helpful hints : When your searching reaches the end of the last track, the CD goes to stop mode. 2 For a disc with CD Audio tracks and MP3 files, only the CD Audio tracks will be played. Insert a CD with the printed side facing up and press the CD door gently to close. Display shows -- and later, the total number of tracks. (See 2, 3) Press 2; on the set to start playback. Display: 2 and the current track number. Helpful hints : CD play will also stop when: you open the CD compartment; you select TUNER, or TAPE/OFF sound source; the CD has reached the end of playback. 2 1 2 3 3 2 3 ­ 4 5 4 5 6 ­ · ­ ­ ­ 6 7 Cassette Recorder Cassette playback 1 2 3 4 5 6 1 2 ­ Adjust the source selector to TAPE/OFF. Press 9/ to open the cassette holder, and insert a cassette and close the deck. To stop the tape, press 9/. Safety & Maintenance 1 2 3 4 CD synchro start recording Select CD source. Insert a CD and if desired, program track numbers. Playing of the CD program starts automatically from the beginning of the program. It is not necessary to start the CD player separately. [. . . ] The lens of the CD player should never be touched!Sudden changes in the surrounding temperature can cause condensation on the lens of your CD player. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates. Always close the CD-tape door to avoid dust on the lens. [. . . ]