사용자 설명서 SONY ECM-HQP1

[. . . ] *Q8418-90032* *Q8418-90032* *Q841890032* 3 KO . *Purchase a USB cable and photo paper separately if it is not included. ZHCN EN * * 4 a KO USB a. NOTE: Pay attention to the helpful messages in the display during the setup process. ZHCN EN b 5 KO · / . [. . . ] Use the arrows to select your language from the list of languages, then press OK to confirm. Select your country/ region, and press OK to confirm. To change the language or country/region, use the Back button. · Follow the prompt to install print cartridges, then go to the next step in this guide. ZHCN · SONY Photosmart C4600 AllinOne series / SONY Photosmart C4600 AllinOne series 6 KO . : . ZHCN EN Open the print cartridge door. Make sure the printer carriage moves to the center. If it does not move to the center, turn the device off, then turn it back on again. IMPORTANT: The device must be turned on to insert cartridges. 7 KO . Turn on your computer, login if necessary, and then wait for the desktop to appear. Insert the blue CD and follow the onscreen instructions. IMPORTANT: If the startup screen does not appear, doubleclick My Computer, doubleclick the CDROM icon with the SONY logo, and then doubleclick setup. exe. EN a. Once the USB prompt appears, connect the USB cable to the port on the back of the SONY AllinOne, and then to any USB port on the computer. Follow the onscreen instructions to complete the software installation. 6 · SONY Photosmart C4600 AllinOne series / SONY Photosmart C4600 AllinOne series 1 Mac 1 A B KO USB SONY AllinOne USB . KO a. Setup Assistant( ) . ZHCN USB SONY AllinOne USB ZHCN a. EN Connect the USB cable to the port on the back of the SONY AllinOne, and then to any USB port on the computer. EN a. Doubleclick the SONY Photosmart CD icon on the desktop. [. . . ] Complete the Setup Assistant screen. SONY Photosmart C4600 AllinOne series / SONY Photosmart C4600 AllinOne series · 7 KO ZHCN EN Troubleshooting www. hp. com/support KO : (Windows) Microsoft . (Windows) Microsoft"" USB SONY AllinOne CD Problem: (Windows) The Microsoft Add Hardware screen appears. Unplug the USB cable, and then insert the blue SONY AllinOne CD. ZHCN EN KO : (Windows ) Device Setup Has Failed To Complete( ) . [. . . ]