사용자 설명서 HITACHI CPX4

[. . . ] Refer to the number of display pixels above. (1600x1200), the signal will be converted to the projector's panel resolution before being displayed. The best display performance will be achieved if the resolutions of the input signal and projector panel are identical. [. . . ] Using the projector default settings (Reset Command) (1) The PC sends the following default setting code to the projector. Header + Command data (`06H' + `00H' + type (2 bytes) + `00H' + `00H') (3) The projector returns the response code `06H' to the PC. Increasing the projector setting value (Increment command) (1) The PC sends the following increment code to the projector. Header + Command data (`04H' + `00H' + type (2 bytes) + `00H' + `00H') (2) The projector increases the setting value on the above setting code. (3) The projector returns the response code `06H' to the PC. 8 Command Control via the Network (continued) Decreasing the projector setting value (Decrement command) (1) The PC sends the following decrement code to the projector. Header + Command data (`05H' + `00H' + type (2 bytes) + `00H' + `00H') (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code `06H' to the PC. When the projector cannot understand the received command When the projector cannot understand the received command, the error code `15H' is sent back to the PC. Sometimes the projector cannot properly receive the command. In such a case, the command is not executed and the error code `15H' is sent back to the PC. If this error code is returned, send the same command again. When the projector cannot execute the received command. When the projector cannot execute the received command, the error code `1CH' + `xxxxH' is sent back to the PC. When the data length is greater than indicated by the data length code, the projector ignore the excess data code. [. . . ] 02 38073415 Email: customerservice. italy@hitachi-eu. com HITACHI EUROPE S. A. S Lyon Office B. P. 45, 4 Allée des Sorbiers 69671 Bron Cedex FRANCE Tel: 04 72 14 29 70 Fax: 04 72 14 29 99 Email: france. consommateur@hitachi-eu. com HITACHI EUROPE S. A. 152 33 Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835694 Email: service. hellas@hitachi-eu. com HITACHI EUROPE S. A. Gran Via Carlos III 86 Planta 5a Edificios Trade - Torre Este 08028 Barcelona SPAIN Tel: 93 409 2550 Fax: 93 491 3513 Email: atencion. cliente@hitachi-eu. com HITACHI EUROPE AB Box 77 S-164 94 KISTA SWEDEN Tel: 08 562 711 00 Fax: 08 562 711 11 Email: csgswe@hitachi-eu. com HITACHI EUROPE LTD. [. . . ]