사용자 설명서 HITACHI CP-X264WF

[. . . ] · Some PCs may have multiple display screen modes. Use of some of these modes will not be possible with this projector. [. . . ] (3) The projector returns the response code `06H' to the PC. Decreasing the projector setting value (Decrement command) (1) The PC sends the following decrement code to the projector. Header + Command data (`05H' + `00H' + type (2 bytes) + `00H' + `00H') (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code `06H' to the PC. When the projector cannot understand the received command When the projector cannot understand the received command, the error code `15H' is sent back to the PC. Sometimes the projector cannot properly receive the command. In such a case, the command is not executed and the error code `15H' is sent back to the PC. If this error code is returned, send the same command again. When the projector cannot execute the received command When the projector cannot execute the received command, the error code `1CH' + `xxxxH' is sent back to the PC. When the data length is greater than indicated by the data length code, the projector ignore the excess data code. [. . . ] 02 38073415 Email: customerservice. italy@hitachi-eu. com HITACHI EUROPE AB Box 77 S-164 94 KISTA SWEDEN Tel: 08 562 711 00 Fax: 08 562 711 11 Email: csgswe@hitachi-eu. com HITACHI EUROPE S. A. S Lyon Office B. P. 45, 69671 Bron Cedex FRANCE Tel: 04 72 14 29 70 Fax: 04 72 14 29 99 Email: france. consommateur@hitachi-eu. com HITACHI EUROPE LTD. [. . . ]